Did you know that up to 30% of heat loss or gain is through an un-insulated ceiling?

Our engineered blow-in insulation solutions will increase the thermal performance of your ceiling, saving you money and making your home more comfortable all year round – warm in winter and cool in summer. If you have existing insulation, it can be topped up to increase overall performance and if you have none, we recommend insulating your ceiling to the highest R-Value, also known as it’s ‘thermal resistance’. This is the measure of theinsulation’s ability to resist the transfer of heat. By doing so, you will benefit now and in the long term.

Jet Stream® MAX is a high performing, engineered blow in glasswool insulation for ceilings in existing homes. It has exceptional thermal performance and a proven track record in North America and Europe.

  • •  Excellent thermal performance
  • •  Save on energy costs
  • •  Non-combustible
  • •  Trusted insulation solution
  • •  Excellent coverage – fills all gaps and voids

 
Jet Stream® MAX is an ideal solution for insulating ceilings in existing homes. It can be installed in ceilings where there is no existing insulation or as a top up layer over existing insulation. It provides a high level of thermal performance by providing a continuous layer of insulation, which reduces thermal bridging. Jet Stream® MAX should only be installed by Approved Installers to ensure the highest quality and installed performance.

Install Instructions

The insulation is blown into the ceiling space by Approved Installers. Jet Stream® MAX will be installed in your ceiling to form an even layer of insulation that meets your specific thermal performance requirements. The process is quick and clean and will provide minimal disruption – it will be completed before you know it.

The installation of insulation will only be carried out once a full assessment of the suitability of the property and area to be insulated has been completed.

max-icon

 

 

 

Certification

CodeMark™ is the highest level of product compliance in New Zealand, which is your assurance of the product’s suitability for use in your home and that it will perform as it should. CodeMark™ certification will also provide a smooth compliance pathway with local building authorities.

Specifications

Nominal
Thickness (mm)
R-Value
(m2K/W)
Installed Density
(kg/m3)
Thermal Conductivity
(W/mK)
160
3.2
8 - 9
0.049
180
3.6
8 - 9
0.049
205
4.1
8 - 9
0.049
255
5.2
8 - 9
0.049
310
6.3
8 - 9
0.049
360
7.3
8 - 9
0.049
410
8.4
8 - 9
0.049
460
9.4
8 - 9
0.049
510
10.4
8 - 9
0.049